Waydoo Flyer EVO Remote

First confirm both the remote and the board are charged and the firmware is current. Then:

1. Restart both the remote and the EVO.
2. On the remote, long-press Power and Minus together. This drops the old connection and starts a fresh Bluetooth search.
3. Once the remote picks up the mast signal, pull the trigger to pair.

If the remote cannot find the mast signal at all, file a claim. Record a pairing video in a quiet room with the startup sound audible and attach it, so our team can hear what is happening.

Nothing is wrong. The R means the remote is in reverse gear.

To toggle it: with the remote locked and the lock icon showing, hold Minus and Plus together for three seconds to enter reverse. Repeat the same action to come back out of it.

Isolate which part is at fault before anything else:

1. Try a different charging cable, or charge a different remote with the same cable.
2. Look into the charging port for corrosion or damage.

If the remote still will not power on normally, file a claim rather than opening it.

The video below covers the remote's function setup, including calibrating the throttle trigger.

Trigger calibration is also the fix if you see an angle overflow message. That appears either because of magnetic interference, in which case restart the remote, or because the throttle travel no longer matches, in which case recalibrate.